Simple 4-Step Guide to Remove Watch Links

1. Identify Links to Remove

• Place the watch on a clean, flat surface.

• Examine the bracelet and decide which link(s) to remove for the right fit.

• For balance, remove an equal number of links from each side of the clasp.

2. Prepare the Link Removal Tool

• If needed, assemble the tool by inserting the pointed end into the handle.

• Position the tool so the pin aligns precisely with the bracelet’s link pin.

• Ensure proper alignment opposite the link pin.

3. Remove the Link Pin

• Gently apply pressure with the tool to push the pin out of the bracelet.

• Once the pin is loose, pull it out carefully using fingers or small pliers.

• If resistance occurs, apply steady, controlled pressure without forcing it.

4. Reassemble the Watch Band

• Align the remaining links.

• Insert the pin back through the links in the reverse direction.

• Check that the pin is secure and links are properly connected.

Extra Tips

• Work in a bright area for better visibility.

• Use a soft cloth or pad to protect the watch from scratches.

• Be patient and gentle to avoid damage.

• If unsure, consult a professional jeweller.

Milanese Watch Band Adjustment Instructions

What You’ll Need

• Milanese watch band

• Small flathead screwdriver (optional, depending on clasp type)

Instructions

1. Locate the Adjustable Clasp

• Find the clasp on the mesh band; it usually has a small lever or latch.

2. Open the Clasp

• Use a fingernail or small screwdriver to lift the latch carefully.

• Avoid scratching the metal surface.

3. Slide the Clasp

• Once open, slide the clasp along the mesh to adjust the length.

4. Align with a Groove

• Make sure the clasp sits in one of the grooves to hold it securely.

5. Close the Clasp

• Push the latch back down until it clicks firmly into place.

• Confirm that it is locked properly.

6. Test the Fit

• Try the watch on to ensure a snug but comfortable fit.

• Repeat adjustment if necessary for the perfect size.

Tips

• Work on a clean, flat surface to avoid losing parts.

• Handle the mesh band gently to prevent bending or kinks.

• Your Milanese band is now adjusted and ready to wear.